ÜRÜNLER

Image Image Image Image
Image
Image
Image
Image

Rio3224-D2

Marka : Yamaha

Bu yüksek kapasiteli, yüksek performanslı G/Ç rafı, Yamaha CL ve QL serisi konsolların yanı sıra RIVAGE PM serisiyle de uyumludur. 32 analog giriş, 16 analog çıkış ve sekiz dijital AES/EBU çıkışı içerir. Rio3224-D2, Dante dijital ses ağlarına doğrudan bağlanarak esnek sistem yapılandırmasına olanak tanır. Yüksek güvenilirlik için çift güç kaynağı ünitesi yerleşiktir ve bir karakter/grafik ekranı kolay görsel onay sunar.

  • 32 analog giriş ve 16 çıkış, 8 dijital çıkış.
  • Yedekli bağlantılar birincil ve ikincil konnektörlerle desteklenir. Daisy chain bağlantıları da desteklenir.
  • Kazanç ve diğer parametrelerin kapsamlı gösterimi ve yerel kontrolü.
  • Yüksek güvenilirlik için çift güç kaynağı üniteleri tasarlanmıştır.
  • Güç tüketimi: 120W
  • Boyutlar (GxYxD): 480 x 220 x 368 mm (18,9" x 8,7" x 14,5")
  • Net Ağırlık: 13,5 kg (29,8 lbs)

  Rio3224-D2 Rio1608-D2
Sampling frequency rate External 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, +4.1667%, +0.1%, ?0.1%, ?4.0% (±200 ppm) 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, +4.1667%, +0.1%, ?0.1%, ?4.0% (±200 ppm)
Signal delay Less than 1.7 ms, Rio INPUT to Rio OUTPUT connect with PM10 using Dante, Fs= 96 kHz, Dante Receive Latency set to 0.25 msec Less than 1.7 ms, Rio INPUT to Rio OUTPUT connect with PM10 using Dante, Fs= 96 kHz, Dante Receive Latency set to 0.25 msec
Total harmonic distortion Less than 0.05% 20 Hz-20 kHz@+4 dBu into 600?, Fs= 48 kHz, Less than 0.05% 20 Hz-40 kHz@+4 dBu into 600?, Fs= 96 kHz, INPUT to OUTPUT, Input Gain= Min. Less than 0.05% 20 Hz-20 kHz@+4 dBu into 600?, Fs= 48 kHz, Less than 0.05% 20 Hz-40 kHz@+4 dBu into 600?, Fs= 96 kHz, INPUT to OUTPUT, Input Gain= Min.
Frequency response +0.5, ?1.5 dB 20 Hz-20 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 48 kHz / +0.5, ?1.5 dB 20 Hz-40 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 96 kHz +0.5, ?1.5 dB 20 Hz-20 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 48 kHz / +0.5, ?1.5 dB 20 Hz-40 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 96 kHz
Dynamic range 112 dB typ., DA Converter, 108 dB typ., INPUT to OUTPUT, Input Gain= Min. 112 dB typ., DA Converter, 108 dB typ., INPUT to OUTPUT, Input Gain= Min.
Hum & noise level Equivalent input noise ?128 dBu typ., Input Gain= Max. ?128 dBu typ., Input Gain= Max.
Residual output noise ?88 dBu, ST master off ?88 dBu, ST master off
Crosstalk -100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB, @1 kHz *Measured with a 30dB/octave filter @22kHz -100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB, @1 kHz *Measured with a 30dB/octave filter @22kHz
Power requirements 100-240V, 50/60Hz 100-240V, 50/60Hz
Power consumption 120W 72W
Dimensions W 480 mm (18.9") 480 mm (18.9")
H 220 mm (8.7") 132 mm (5.2")
D 368 mm (14.5") 368 mm (14.5")
Net weight 13.5 kg (29.8 lbs) 9.6 kg (21.2 lbs)
Accessories Owner?s Manual, AC power cord (250cm) Owner?s Manual, AC power cord (250cm)
Others NC Value: FAN MODE LOW: NC=20 / HIGH: NC=30 (Measurement position: 1 m from the front of the unit), Operating temperature range: 0 - 40°C, Storage temperature range: ?20 - 60°C NC Value: FAN MODE LOW: NC=15 / HIGH: NC=25 (Measurement position: 1 m from the front of the unit), Operating temperature range: 0 - 40°C, Storage temperature range: ?20 - 60°C