| General specifications |
| Sampling frequency rate |
External |
44.1kHz, 48kHz, 88.2kHz, 96kHz |
| Signal delay |
Less than 1.3ms INPUT to OUTPUT, connect with DM3, Dante Receive Latency set to 0.25ms (one way), Fs=96kHz; Less than 2.6ms INPUT to OUTPUT, connect with DM3, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz |
| Total harmonic distortion |
Less than 0.2% +4 dBu@20Hz-20kHz into 600?, Gain=+66 dB / Less than 0.05% +4 dBU@20Hz-20kHz into 600?, Gain=-6 dB, INPUT to OUTPUT, Fs=88.2kHz, 96kHz; Less than 0.1% +4 dBu@20Hz-20kHz into 600?, Gain=+66 dB / Less than 0.05% +4 dBU@20Hz-20kHz into 600?, Gain=-6 dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18 dB/octave filter @80kHz |
| Frequency response |
+0.5, -1.5 dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT |
| Dynamic range |
108 dB, INPUT to OUTPUT, Gain=-6 dB / 110 dB, DA Converter, Fs 96kHz; 108 dB, INPUT to OUTPUT, Gain=-6 dB / 112 dB, DA Converter, Fs 48kHz |
| Hum & noise level |
Equivalent input noise |
-128 dBu, Gain=+66 dB, Fs 96kHz, 48kHz *Measured with A-weighting filter |
| Residual output noise |
-86 dBu, Fs 96kHz / -88 dBu, Fs 48kHz, ST main off *Measured with A-weighting filter |
| Crosstalk |
-100 dB, adjacent INPUT/OUTPUT channels, Input Gain = -6 dB *Measured with a -30 dB/octave filter @22kHz |
| Heat dissipation |
100-240V, 50/60Hz, 43.5kcal/h |
| Power requirements |
100-240V, 50/60Hz |
| Power consumption |
50W |
| Dimensions |
W |
480mm (18.9?) |
| H |
88mm (3.5?) |
| D |
364mm (14.4?) |
| Net weight |
5.7kg (12.6lbs) |
| Accessories |
Owner?s Manual, Power Cord (2.5m), Rubber stoppers (4) |
| Others |
Temperature Range: Operating temperature range: 0 - 40?, Storage temperature range: -20 - 60? |